Prototype Thin 6 Layer PCB 0.6mm thick Half oz for each Layer with Immersion Gold
in GpsTracking Device
Commodity Introduction
This is a type of FR-4 PCB for the application of Gps Tracking Device. It's a 6 layer board at
0.6mm thick. The base laminate is from ITEQ, Solder mask and silkscreen from KUANG SHUN.
It's fabricated per IPC 6012 Class 2 using supplied Gerber data. Each 10 boards or panels are
packed separately.
Parameters & Data Sheet
| Item |
Requirement |
Result |
| Laminate |
Type |
FR-4 |
FR-4 |
| Supplier |
ITEQ |
ITEQ |
| Board thickness |
0.6+/-10%mm |
0.50-0.7mm |
| Outer copper foil |
>=35 um |
36.1 |
| Inner copper foil |
17um |
17um |
| Warp-twist |
<= 0.75% |
0.06% |
| Legend |
Type |
KUANG SHUN |
KUANG SHUN |
| Color |
White |
White |
| Location |
CS |
CS |
| Marking |
Co.logo |
As requirement |
OK |
| UL.logo |
As requirement |
OK |
| Date code |
As requirement |
OK |
| Marking form |
As requirement |
OK |
| Location |
NA |
|
| Min line width (mil) |
7.8 |
7.6 |
| Min line spacing (mil) |
5.5 |
5.7 |
| Min ring width (mil) |
NA |
NA |
| Solder Mask |
Type |
KUANG SHUN |
KUANG SHUN |
| Color |
Green |
Green |
| Thickness |
>=10 um |
13 um |
| Pencil Test |
6H OR ABOVE |
OK |
| SOLVENT TEST |
NO ATTACK |
OK |
| TAPE TEST |
NO PEEL OFF |
OK |
| Surface Treament |
ENIG |
OK |
| Special Treament |
Silk screen |
/ |
/ |
| Location |
/ |
/ |
| Forming |
V-cut |
OK |
| Normal Testing |
Electrical test |
100% PCB passed |
OK |
| Visual inspection |
IPC-A-600H&IPC-6012C |
OK |
| Solderability Test |
245ºC 5S 1 Cycle |
OK |
Finished dimension (unit: mm): including v-cut
| No |
Required Dimension (tolerance) |
Actual Dimension |
| 1 |
116.99 |
116.92 |
117.21 |
117.01 |
117.07 |
| 2 |
120.98 |
120.92 |
121.08 |
120.95 |
120.93 |
Hole size and slot dimension(unit: mm, PTH tolerance +/-0.076, NPTH +/-0.05mm)
| No |
Required |
PTH |
Actual Dimension |
| 1 |
0.900 |
Y |
0.900 |
0.875 |
0.925 |
0.900 |
| 2 |
1.000 |
Y |
1.000 |
0.975 |
1.025 |
1.000 |
| 3 |
3.100 |
N |
3.100 |
3.075 |
3.125 |
3.100 |
Learn PCB and Buy PCB
PCB Bow and Warpage
The value B shall be less than 0.75% of the diagonal of the panel.
Audited Supplier 
){kind=link}