1.1 General description
This is a type of double sided PCB built on FR-4 substrate with Tg 150°C for the application
of Access Security. It's 0.8 mm thick with white silkscreen(Taiyo) on matt blue solder mask
(Kuangshun) and selective hard gold on pads. The base material is from ITEQ supplying 6
up PCBs per panel. They're fabricated per IPC 6012 Class 2 using supplied Gerber data.
Each 40 panels are packed for shipment.
1.2 Features and benifits
a. Very Low Moisure Absorption and better CAF resistance;
b. Excellent dimensionaly stability;
c. Good wear resistance and low contact resistance;
d. It can meet the chip test and meet the special needs of your products;
e. AOI inspection;
f. Electrical test and high voltage test;
g. Competitive price;
h. No MOQ, low cost for prototypes and small runs quantity;
1.3 Application
DC Motor, Led Driver, Programmable Logic Controller, Cable Router, 3G Antenna, Led Light
Kits, Fleet GPS Tracking, Access Controller, RF Identification, Nuclear detection systems
1.4 Parameter and data shee
| PCB SIZE |
170 x 64 =6 UP |
| BOARD TYPE |
Double sided PCB |
| Number of Layers |
2 layers |
| Surface Mount Components |
YES |
| Through Hole Components |
no |
| LAYER STACKUP |
copper ------- 18um(0.5oz)+plate TOP layer |
| FR-4 0.7 mm |
| copper ------- 18um(0.5oz)+plate BOT layer |
| TECHNOLOGY |
|
| Minimum Trace and Space: |
15 mil / 6.5 mil |
| Minimum / Maximum Holes: |
0.3 mm / 3.5 mm |
| Number of Different Holes: |
2 |
| Number of Drill Holes: |
35 |
| Number of Milled Slots: |
5 |
| Number of Internal Cutouts: |
0 |
| Impedance Control: |
no |
| Number of Gold finger: |
0 |
| BOARD MATERIAL |
|
| Glass Epoxy: |
FR-4 Tg150ºC, er<5.4.IT-158, ITEQ Supplied |
| Final foil external: |
1 oz |
| Final foil internal: |
0 oz |
| Final height of PCB: |
0.8 mm ±0.08 |
| PLATING AND COATING |
|
| Surface Finish |
Selective hard gold on pads 10 u" |
| Solder Mask Apply To: |
TOP and Bottom, 12micron Minimum |
| Solder Mask Color: |
Matt blue, KSM-S6189BLM1 |
| Solder Mask Type: |
LPSM |
| CONTOUR/CUTTING |
Routing, v-cut |
| MARKING |
|
| Side of Component Legend |
TOP |
| Colour of Component Legend |
White, IJR-4000 MW300, Taiyo brand |
| Manufacturer Name or Logo: |
Marked on the board in a conductor
and leged FREE AREA |
| VIA |
Plated through hole(PTH), minimum size 0.3mm. |
| FLAMIBILITY RATING |
UL 94-V0 Approval MIN. |
| DIMENSION TOLERANCE |
|
| Outline dimension: |
0.0059" |
| Board plating: |
0.0029" |
| Drill tolerance: |
0.002" |
| TEST |
100% Electrical Test prior shipment |
| TYPE OF ARTWORK TO BE SUPPLIED |
email file, Gerber RS-274-X, PCBDOC etc |
| SERVICE AREA |
Worldwide, Globally. |
Audited Supplier 
){kind=link}