Immersion Gold with Edge connector Black color High temperature 170Tg 1.6mm 8 Layer
PCB in Wireless Adapter
Commodity Introduction
This is a type of FR-4 PCB for the application of Wireless Adapter. It's an 8 layer board at 1.6mm
thick. The base laminate is from ITEQ, Solder mask and silkscreen from Taiyo. It's fabricated per
IPC 6012 Class 2 using supplied Gerber data. Each 10 boards or panels are packed separately.
Parameters & Data Sheet
| Item |
Requirement |
Result |
| Laminate |
Type |
FR-4 TG170 |
FR-4 TG170 |
| Supplier |
ITEQ |
ITEQ |
| Board thickness |
1.60±10%mm |
1.45-1.50mm |
| Outer copper foil |
>=35 um |
44.08um |
| Inner copper foil |
1/1 OZ |
1/1 OZ |
| Warp-twist |
<= 1% |
0.77%(max) |
| Legend |
Type |
IJR-4000 MW300 |
IJR-4000 MW300 |
| Color |
White |
White |
| Location |
CS |
CS |
| Marking |
Co.logo |
YES |
OK |
| UL.logo |
YES |
OK |
| Date code |
WWYY |
WWYY |
| Marking form |
NA |
OK |
| Location |
CS |
CS |
| Min line width (mil) |
7.9 |
8.1 |
| Min line spacing (mil) |
5.9 |
5.7 |
| Min ring width (mil) |
NA |
NA |
| Solder Mask |
Type |
KSM-S6189BK31 |
KSM-S6189BK31 |
| Color |
Black |
Black |
| Thickness |
>=10 um |
14 um |
| Pencil Test |
6H OR ABOVE |
OK |
| SOLVENT TEST |
NO ATTACK |
OK |
| TAPE TEST |
NO PEEL OFF |
OK |
| Surface Treament |
Immersion Gold |
OK |
| Special Treament |
Silk screen |
/ |
/ |
| Location |
/ |
/ |
| Forming |
/ |
/ |
| Normal Testing |
Electrical test |
100% PCB passed |
OK |
| Visual inspection |
IPC-A-600H&IPC-6012C |
OK |
| Solderability Test |
245ºC 5S 1 Cycle |
OK |
Finished dimension (unit: mm): including v-cut
| No |
Required Dimension (tolerance) |
Actual Dimension |
| 1 |
173.00±0.15 |
172.95 |
172.97 |
172.92 |
173.02 |
| 2 |
197.99±0.15 |
197.99 |
198.08 |
197.90 |
197.97 |
Learn PCB and Buy PCB
Characteristics of PCB
PCB has been more and more widely used, because it has many unique advantages. It can
be summarized as follows.
a) Can be high density. For decades, PCB with high density can be developed with the integration
of integrated circuits and surface mount technology progress.
b) High reliability. Through a series of inspection, testing and aging tests can ensure long time
(use period, generally 20 years) and reliable work.
c) Designability. Various performance (electrical, physical, chemical, mechanical, etc.)
requirements on PCB can be achieved by design standardization and standardization, etc.
short time and high efficiency.
d) Productibility. The use of modern management, it can be produced by standardization
production, scale production (mass production), automatic production etc to ensure product
quality consistency.
e) Testability. Established a series of complete testing methods, testing standards, a variety of
testing equipment and instrument etc, It can detect and identify the PCB quality and service life.
f) Can be assembled. PCB products not only facilitate the standardized assembly of various
components, but also can be automated, large-scale mass produced. At the same time, PCB
and its assembled components can be also assembled to form a larger component, system,
until the whole machine.
g) Maintainability. As PCB products and various components of the assembly are standardized
design and large-scale production, and thus, these assembled components are standardized.
So once the system fails, it can be fast, convenient and flexible replaced, quickly restore the
service system.
Audited Supplier 
){kind=link}