Rogers 60mil RO4350b PCB for Amplifiers, Satellite Systems, and Welding Equipment

• Customization: Available
• Type: Rigid Circuit Board
• Dielectric: CEM-4
• Model NO.: BIC-066-V1.0
• Material: Fiberglass Epoxy
• Flame Retardant Properties: V0
• Mechanical Rigid: Rigid
• Processing Technology: Electrolytic Foil
• Base Material: Aluminum
• Insulation Materials: Hydrocarbon Resin
• Model: PCB
• Brand: Rogers
• Tihickness: 8mil, 10mil, 12mil, 20mil, 32mil and 60mil
• Soldermask Color: Blcak, Blue, Yellow, Red, Green...
• Copper Weight: 0.5oz, 1oz, 2oz
• Transport Package: Packing
• Specification: ≤ 400mm X 500mm
• Trademark: Bicheng
• Origin: China
• HS Code: 8534009000
• Production Capacity: 10000PCS/Year

Product Description

4 Layer RF Circuit Board On Rogers 60mil RO4350B and 10mil RO4350B with Back Drill for UHF Coupler
(Printed circuit boards are custom-made products, the picture and parameters shown are just for reference)

Hello Everyone,
This 4 layer RF PCB is built on 60mil RO4350B and 10mil RO4350B for the application of UHF coupler. Look at the stack-up.


Base materials are 60mil RO4350B core and 10mil RO4350B core plus 4mil RO4450F prepreg. There're 35 μm(1oz) copper on each layer with final height 2.1mm thick. Pads are immersion gold plated. There're back drilled via from 10mil core. Back drilling can reduce noise interference and improve signal integrity. Using back drilling successfully reduced the difficulty of PCB fabrication and avoided the use of buried /blind via.

Features and benefits
1) RO4350B exhibits a stable dielectric constant over a broad frequency range;
2) RO4350B makes it an ideal substrate for broadband applications;
3) Delivery on time higher than 98% on-time-delivery rate;
4) Focusing on small batches and medium volume production;
5) Strict WIP inspection and monitoring as well as working instruction;

Applications
Antenna, Interference filter, Sound control switch induction, Trunk amplifier

PCB Data Sheet

PCB SIZE	91 x 98mm=1PCS
BOARD TYPE	High Frequency PCB
Number of Layers	Multilayer PCB, 4 Layer PCB
Surface Mount Components	YES
Through Hole Components	YES
LAYER STACKUP	copper ------- 35um(1oz)+plate TOP layer
	RO4350B 60 mil
	copper -------  MidLayer 1
	RO4450F 4 mil
	copper -------  MidLayer 2
	RO4350B 10 mil
	copper ------- 35um(1oz)+plate BOT Layer
TECHNOLOGY
Minimum Trace and Space:	10mil / 10mil
Minimum / Maximum Holes:	0.3/3.21mm
Number of Different Holes:	5
Number of Drill Holes:	1680
Number of Milled Slots:	1
Number of Internal Cutouts:	1
Impedance Control	no
BOARD MATERIAL
Glass Epoxy:	Rogers RO4350B( core 10mil, DK=3.48)  & RO4450B(PP 4mil DK=3.54)
Final foil external:	1.5oz
Final foil internal:	1oz
Final height of PCB:	2.1mm ±10%
PLATING AND COATING
Surface Finish	Immersion Gold (71.1%) 2µ" over 100µ" nickel
Solder Mask Apply To:	Top and Bottom layer
Solder Mask Color:	N/A
Solder Mask Type:	N/A
CONTOUR/CUTTING	Routing
MARKING
Side of Component Legend	N/A
Colour of Component Legend	N/A
Manufacturer Name or Logo:	N/A
VIA	Plated Through Hole(PTH), via open
FLAMIBILITY RATING	UL 94-V0 Approval MIN.
DIMENSION TOLERANCE
Outline dimension:	0.0059" (0.15mm)
Board plating:	0.0030" (0.076mm)
Drill tolerance:	0.002" (0.05mm)
TEST	100% Electrical Test prior shipment
TYPE OF ARTWORK TO BE SUPPLIED	email file, Gerber RS-274-X, PCBDOC etc
SERVICE AREA	Worldwide, Globally.